CNC Engraving Machine Maintenance Knowledge

CNC engraving machine maintenance knowledge: as a precision CNC CNC engraving machine routine maintenance and maintenance is necessary, can improve the efficiency of CNC engraving machine.

1. CNC engraving machine screw, light bar maintenance: each machine is used to pay attention to clean up, be sure to platform and transmission system on the dust clean, regular (weekly) on the transmission system (X, Y, Z three Shaft) lubrication refueling. (Note: X, Y, Z three-axis light rod with oil for maintenance; screw part of the high-speed butter; winter if the working environment temperature is too low screw, light rod (square rail or circular guide) part should first use gasoline to clean , And then add the oil, otherwise it will cause the machine drive part of the resistance is too large and lead to machine dislocation.

Second, the replacement of circulating cooling water: continuous operation time of 10 hours a day or less to ensure that the cooling water and the normal operation of the pump, the water spindle motor must not appear water shortages, regular replacement of cooling water to prevent the water temperature is too high. If the temperature in the working environment is too low, the water inside the tank can be replaced with antifreeze.

3. CNC engraving machine electrical maintenance: the electrical maintenance inspection is, must cut off the power, until the monitor without the display and the main circuit power indicator light extinguished before proceeding.